Norm: No norm
Quick change tapping chucks with length compensation on compression and expansion
For the chucking of quick change adaptors for taps.
For machining centres without synchronous spindle.
Version:
- Compact design, with flexible length compensation by compression and tension.
- Adjustable lead-in pressures for different materials and taps.
Application:
- To produce threads that are true to gauge.
- For right-hand and left-hand thread.
- For NC machines and machining centres.
Size 1 = M3 to M14
Size 2 = M5 to M22
Size 3 = M14 to M36
DIN4000-94 Designation (Connection code type workpiece side): SWB - Quick change adapter BILZ
Quick change tapping chucks without length compensation on compression and expansion
For the chucking of quick change adaptors for taps.
For machining centres with synchronous spindle.
Size 1 = M3 to M14
Size 2 = M5 to M22
Size 3 = M14 to M36
DIN4000-94 Designation (Connection code type workpiece side): SWB - Quick change adapter BILZ
Quick change adaptors
DIN4000-94 Designation (Connection code type machine side): SWB - Quick change adapter BILZ
Tapping chucks for synchronisation for collets DIN 6499 (ISO 15488) ER-system
For machining centres with synchronous spindle.
- Synchro tapping chucks compensate synchronisation errors.
- Minimal length compensation on compression and expansion balances very small pitch differences between synchro spindle and tap, which can cause high frictional forces on the thread flanks.
- A possible increase of axial force during the tapping process is reduced to a minimum.
- Suitable for internal coolant.
- Coolant pressure up to max. 100 bar.
ER16 = M3 to M12
ER20 = M3 to M16
ER25 = M3 to M20
ER32 = M3 to M27
ER40 = M3 to M33
Rigid Weldon element
To take taps and others in a Weldon arbor. Plain toolholder, hardened and ground with quick-release coupling. Internal square to take taps and transmit the torque. Clamping mechanism prevents the tap being pulled out. Two drive flats, offset by 180° and 10 mm.
- Attractively priced solution.
- Sturdy, slim version.
- Variation in the clamping and overhang lengths.
Norm: No norm Quick change tapping chucks with length compensation on compression and expansion For the chucking of quick change adaptors for taps. For machining centres without synchronous...
read more »
Close window
Tapping chucks
Norm: No norm
Quick change tapping chucks with length compensation on compression and expansion
For the chucking of quick change adaptors for taps.
For machining centres without synchronous spindle.
Version:
- Compact design, with flexible length compensation by compression and tension.
- Adjustable lead-in pressures for different materials and taps.
Application:
- To produce threads that are true to gauge.
- For right-hand and left-hand thread.
- For NC machines and machining centres.
Size 1 = M3 to M14
Size 2 = M5 to M22
Size 3 = M14 to M36
DIN4000-94 Designation (Connection code type workpiece side): SWB - Quick change adapter BILZ
Quick change tapping chucks without length compensation on compression and expansion
For the chucking of quick change adaptors for taps.
For machining centres with synchronous spindle.
Size 1 = M3 to M14
Size 2 = M5 to M22
Size 3 = M14 to M36
DIN4000-94 Designation (Connection code type workpiece side): SWB - Quick change adapter BILZ
Quick change adaptors
DIN4000-94 Designation (Connection code type machine side): SWB - Quick change adapter BILZ
Tapping chucks for synchronisation for collets DIN 6499 (ISO 15488) ER-system
For machining centres with synchronous spindle.
- Synchro tapping chucks compensate synchronisation errors.
- Minimal length compensation on compression and expansion balances very small pitch differences between synchro spindle and tap, which can cause high frictional forces on the thread flanks.
- A possible increase of axial force during the tapping process is reduced to a minimum.
- Suitable for internal coolant.
- Coolant pressure up to max. 100 bar.
ER16 = M3 to M12
ER20 = M3 to M16
ER25 = M3 to M20
ER32 = M3 to M27
ER40 = M3 to M33
Rigid Weldon element
To take taps and others in a Weldon arbor. Plain toolholder, hardened and ground with quick-release coupling. Internal square to take taps and transmit the torque. Clamping mechanism prevents the tap being pulled out. Two drive flats, offset by 180° and 10 mm.
- Attractively priced solution.
- Sturdy, slim version.
- Variation in the clamping and overhang lengths.
