Tapping chucks for synchronisation HSK100 - M3-M16 (ER20) - 101 DIN69893-A

€370.00 *

Prices plus VAT plus shipping costs

Ready to ship today

  • A100.16.02.13
  • 4250001110468
  • 2.5
Application: For machining centres with synchronous spindle. Note: Synchro tapping... more
Product information "Tapping chucks for synchronisation HSK100 - M3-M16 (ER20) - 101 DIN69893-A"

Application:
For machining centres with synchronous spindle.


Note:

  • Synchro tapping chucks compensate synchronisation errors.
  • Minimal length compensation on compression and expansion balances very small pitch differences between synchro spindle and tap, which can cause high frictional forces on the thread flanks.
  • A possible increase of axial force during the tapping process is reduced to a minimum.
  • Suitable for internal coolant.
  • Coolant pressure up to max. 100 bar.


Delivery:
With balanced clamping nut


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm² after DIN
  • All functional surfaces fine machined

 

 

Type : Gewindeschneidfutter
Balance quality : G6.3 | 15.000 1/min
D : 34
C : 0,5
T : 0,5
Balluffchip bore : Ja
Internal coolant : Ja
Concentricity : <= 0,060
Capacity : M3 – M16 (ER 20)
Taper : HSK-A
Cone size : 100
Standard : ISO 12164-1
Face contact : Ja
A : 101
CAD
CAD
Viewed