Dual Contact [ISO 7388-2]
Toolholders with "Dual contact" are developed for machining centre applications. The taper and gripper groove is the same as the traditional steep taper, however, through tight tolerances face contact is achieved increasing bending stiffness.
In stock (29 pcs.)
Boring bar blank BT 30 - 40,5 - 160
~ ISO 7388-2 J [JIS B 6339 A] | DC
~ ISO 7388-2 J [JIS B 6339 A] | DC DUAL CONTACT | with face contact Application:For the manufacturing of special tools.Note:Cone and flange hardened and grinded. Soft body for later processing.All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.305.17.40
€227.00*
In stock (129 pcs.)
Boring bar blank BT 40 - 63 - 250
~ ISO 7388-2 J [JIS B 6339 A] | DC
~ ISO 7388-2 J [JIS B 6339 A] | DC DUAL CONTACT | with face contact Application:For the manufacturing of special tools.Note:Cone and flange hardened and grinded. Soft body for later processing.All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.405.17.63
€227.00*
In stock (113 pcs.)
CNC-Drill chuck BT 30 - 1/13 - 93
~ ISO 7388-2 JD [JIS B 6339 AD] | DC
~ ISO 7388-2 JD [JIS B 6339 AD] | DC DUAL CONTACT | with face contact Application:For mounting tools with straight shanks.All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.305.15.13
€280.00*
In stock (149 pcs.)
CNC-Drill chuck BT 30 - 2,5/16 - 98
~ ISO 7388-2 JD [JIS B 6339 AD] | DC
~ ISO 7388-2 JD [JIS B 6339 AD] | DC DUAL CONTACT | with face contact Application:For mounting tools with straight shanks.All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.305.15.16
€290.00*
In stock (113 pcs.)
CNC-Drill chuck BT 40 - 1/13 - 98
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting tools with straight shanks.All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.406.15.13
€280.00*
In stock (158 pcs.)
CNC-Drill chuck BT 40 - 2,5/16 - 103
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting tools with straight shanks.All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.406.15.16
€290.00*
In stock (81 pcs.)
Combi shell mill holder BT 30 - 16 - 45
~ ISO 7388-2 JD [JIS B 6339 AD] | DC
~ ISO 7388-2 JD [JIS B 6339 AD] | DC DUAL CONTACT | with face contact Application:For mounting milling cutters with transverse or longitudinal groove.Delivery:With retaining screw, driving ring and feather keyAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.305.10.16
€95.00*
In stock (72 pcs.)
Combi shell mill holder BT 30 - 22 - 47
~ ISO 7388-2 JD [JIS B 6339 AD] | DC
~ ISO 7388-2 JD [JIS B 6339 AD] | DC DUAL CONTACT | with face contact Application:For mounting milling cutters with transverse or longitudinal groove.Delivery:With retaining screw, driving ring and feather keyAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.305.10.22
€97.00*
In stock (90 pcs.)
Combi shell mill holder BT 30 - 27 - 49
~ ISO 7388-2 JD [JIS B 6339 AD] | DC
~ ISO 7388-2 JD [JIS B 6339 AD] | DC DUAL CONTACT | with face contact Application:For mounting milling cutters with transverse or longitudinal groove.Delivery:With retaining screw, driving ring and feather keyAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.305.10.27
€97.00*
In stock (33 pcs.)
Combi shell mill holder BT 40 - 16 - 55
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting milling cutters with transverse or longitudinal groove.Delivery:With retaining screw, driving ring and feather keyAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.406.10.16
€95.00*
In stock (52 pcs.)
Combi shell mill holder BT 40 - 22 - 55
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting milling cutters with transverse or longitudinal groove.Delivery:With retaining screw, driving ring and feather keyAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.406.10.22
€97.00*
In stock (69 pcs.)
Combi shell mill holder BT 40 - 27 - 55
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting milling cutters with transverse or longitudinal groove.Delivery:With retaining screw, driving ring and feather keyAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.406.10.27
€97.00*
In stock (180 pcs.)
End mill holder Weldon BT 30 - 06 - 50
~ ISO 7388-2 JD [JIS B 6339 AD] | DC
~ ISO 7388-2 JD [JIS B 6339 AD] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.305.04.06
€87.00*
In stock (141 pcs.)
End mill holder Weldon BT 30 - 08 - 50
~ ISO 7388-2 JD [JIS B 6339 AD] | DC
~ ISO 7388-2 JD [JIS B 6339 AD] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.305.04.08
€85.00*
In stock (193 pcs.)
End mill holder Weldon BT 30 - 10 - 50
~ ISO 7388-2 JD [JIS B 6339 AD] | DC
~ ISO 7388-2 JD [JIS B 6339 AD] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.305.04.10
€85.00*
In stock (105 pcs.)
End mill holder Weldon BT 30 - 12 - 50
~ ISO 7388-2 JD [JIS B 6339 AD] | DC
~ ISO 7388-2 JD [JIS B 6339 AD] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.305.04.12
€85.00*
In stock (111 pcs.)
End mill holder Weldon BT 30 - 14 - 50
~ ISO 7388-2 JD [JIS B 6339 AD] | DC
~ ISO 7388-2 JD [JIS B 6339 AD] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.305.04.14
€85.00*
In stock (102 pcs.)
End mill holder Weldon BT 30 - 16 - 63
~ ISO 7388-2 JD [JIS B 6339 AD] | DC
~ ISO 7388-2 JD [JIS B 6339 AD] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.305.04.16
€85.00*
In stock (113 pcs.)
End mill holder Weldon BT 30 - 18 - 63
~ ISO 7388-2 JD [JIS B 6339 AD] | DC
~ ISO 7388-2 JD [JIS B 6339 AD] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.305.04.18
€85.00*
In stock (131 pcs.)
End mill holder Weldon BT 30 - 20 - 63
~ ISO 7388-2 JD [JIS B 6339 AD] | DC
~ ISO 7388-2 JD [JIS B 6339 AD] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.305.04.20
€85.00*
In stock (44 pcs.)
End mill holder Weldon BT 40 - 06 - 100
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.406.04.06.1
€97.00*
In stock (34 pcs.)
End mill holder Weldon BT 40 - 06 - 50
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.406.04.06
€87.00*
In stock (37 pcs.)
End mill holder Weldon BT 40 - 08 - 100
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.406.04.08.1
€90.00*
In stock (42 pcs.)
End mill holder Weldon BT 40 - 08 - 50
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC
~ ISO 7388-2 JD/JF [JIS B 6339 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.406.04.08
€85.00*