Go to homepage
€0.00*

DIN Dual Contact

Toolholders with "Dual contact" are developed for machining centre applications. The taper and gripper groove is the same as the traditional steep taper, however, through tight tolerances face contact is achieved increasing bending stiffness.

Collet chucks for collets ER

Precision collet chuck for ER collets

Milling Chuck

End mill holders

End mill holders with coolant channels

Milling arbors for screw-in cutters

CNC-Drill chucks

Adaptor sleeves

Combi shell mill holders

Shell mill holders

Tapping chucks with l. c.

Tapping chucks for synchron.

Hydraulic expansion chucks

Shrink chucks 4,5°

Boring bar blanks

Test arbors

Technical information
In stock (44 pcs.)
Boring bar blank SK 40 - 63 - 250
Boring bar blank SK 40 - 63 - 250
~ ISO 7388-1 A [DIN 69871 A] | DC
~ ISO 7388-1 A [DIN 69871 A] | DC DUAL CONTACT | with face contact Application:For the manufacturing of special tools.Note:Cone and flange hardened and grinded. Soft body for later processing.All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.402.17.63
€227.00*
In stock (113 pcs.)
CNC-Drill chuck SK 40 - 1/13 - 90
CNC-Drill chuck SK 40 - 1/13 - 90
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting tools with straight shanks.All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.15.13
€280.00*
In stock (159 pcs.)
CNC-Drill chuck SK 40 - 2,5/16 - 95
CNC-Drill chuck SK 40 - 2,5/16 - 95
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting tools with straight shanks.All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.15.16
€290.00*
In stock (86 pcs.)
Combi shell mill holder SK 40 - 16 - 55
Combi shell mill holder SK 40 - 16 - 55
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting milling cutters with transverse or longitudinal groove.With retaining screw, driving ring and feather keyAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.10.16
€95.00*
In stock (73 pcs.)
Combi shell mill holder SK 40 - 22 - 55
Combi shell mill holder SK 40 - 22 - 55
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting milling cutters with transverse or longitudinal groove.With retaining screw, driving ring and feather keyAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.10.22
€97.00*
In stock (96 pcs.)
Combi shell mill holder SK 40 - 27 - 55
Combi shell mill holder SK 40 - 27 - 55
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting milling cutters with transverse or longitudinal groove.With retaining screw, driving ring and feather keyAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.10.27
€98.00*
In stock (41 pcs.)
Combi shell mill holder SK 40 - 32 - 60
Combi shell mill holder SK 40 - 32 - 60
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting milling cutters with transverse or longitudinal groove.With retaining screw, driving ring and feather keyAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.10.32
€110.00*
In stock (45 pcs.)
Combi shell mill holder SK 40 - 40 - 60
Combi shell mill holder SK 40 - 40 - 60
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting milling cutters with transverse or longitudinal groove.With retaining screw, driving ring and feather keyAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.10.40
€120.00*
In stock (48 pcs.)
End mill holder Weldon SK 40 - 06 - 100
End mill holder Weldon SK 40 - 06 - 100
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.04.06.1
€97.00*
In stock (72 pcs.)
End mill holder Weldon SK 40 - 06 - 50
End mill holder Weldon SK 40 - 06 - 50
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.04.06
€81.00*
In stock (62 pcs.)
End mill holder Weldon SK 40 - 08 - 100
End mill holder Weldon SK 40 - 08 - 100
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.04.08.1
€90.00*
In stock (75 pcs.)
End mill holder Weldon SK 40 - 08 - 50
End mill holder Weldon SK 40 - 08 - 50
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.04.08
€75.00*
In stock (62 pcs.)
End mill holder Weldon SK 40 - 10 - 100
End mill holder Weldon SK 40 - 10 - 100
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.04.10.1
€90.00*
In stock (58 pcs.)
End mill holder Weldon SK 40 - 10 - 50
End mill holder Weldon SK 40 - 10 - 50
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.04.10
€75.00*
In stock (62 pcs.)
End mill holder Weldon SK 40 - 12 - 100
End mill holder Weldon SK 40 - 12 - 100
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.04.12.1
€90.00*
In stock (112 pcs.)
End mill holder Weldon SK 40 - 12 - 50
End mill holder Weldon SK 40 - 12 - 50
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.04.12
€75.00*
In stock (49 pcs.)
End mill holder Weldon SK 40 - 14 - 100
End mill holder Weldon SK 40 - 14 - 100
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.04.14.1
€90.00*
In stock (39 pcs.)
End mill holder Weldon SK 40 - 14 - 50
End mill holder Weldon SK 40 - 14 - 50
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.04.14
€75.00*
In stock (68 pcs.)
End mill holder Weldon SK 40 - 16 - 100
End mill holder Weldon SK 40 - 16 - 100
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.04.16.1
€90.00*
In stock (90 pcs.)
End mill holder Weldon SK 40 - 16 - 63
End mill holder Weldon SK 40 - 16 - 63
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.04.16
€75.00*
In stock (41 pcs.)
End mill holder Weldon SK 40 - 18 - 100
End mill holder Weldon SK 40 - 18 - 100
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.04.18.1
€90.00*
In stock (44 pcs.)
End mill holder Weldon SK 40 - 18 - 63
End mill holder Weldon SK 40 - 18 - 63
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.04.18
€75.00*
In stock (76 pcs.)
End mill holder Weldon SK 40 - 20 - 100
End mill holder Weldon SK 40 - 20 - 100
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.04.20.1
€90.00*
In stock (65 pcs.)
End mill holder Weldon SK 40 - 20 - 63
End mill holder Weldon SK 40 - 20 - 63
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC
~ ISO 7388-1 AD/AF [DIN 69871 AD/B] | DC DUAL CONTACT | with face contact Application:For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).Delivery:With clamping screwAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: DC.403.04.20
€75.00*