DIN 69893-5 (HSK-E)
Toolholders with HSK-taper shank
In stock (15 pcs.)
CNC-Drill chucks HSK 40-0,5/8-85
DIN 69893-5 | HSK-E
Application:For mounting tools with straight shanks.Delivery:Without wrench
Article number: E40.15.08
€529.00*
In stock (294 pcs.)
Coolant tube | 100µ Filter HSK 63
DIN 69895
DIN 69895 Coolant pipe with 2 sealing rings, Special O-ring up to 120 bar, angular movement from ±1°, polished Application:For the coolant supply through the centre of HSK toolholders.Note: - With filter for dirt particle-free cooling - 100µ stainless steel mesh filter- According to DIN 69895 for HSK-A and HSK-E hollow taper shanks- Axial sealed with two O-rings- Tightness of the screw connection tested up to 80 bar- After mounting, the coolant tube can be moved only to a minimum degree according to DIN (±1°)
Article number: A63.700.F.100
€49.00*
In stock (8413 pcs.)
Coolant tube HSK 100
ISO 22402-1 (formerly DIN 69895)
ISO 22402-1 (formerly DIN 69895) Coolant pipe with 2 sealing rings, Special O-ring up to 120 bar, angular movement from ±1°, polished Application:For the coolant supply through the centre of HSK toolholders.Note:Axial sealed with two O-rings. After mounting, the coolant tube can be moved only to a minimum degree according to DIN (±1°).All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: A100.700
€14.00*
In stock (96 pcs.)
Coolant tube HSK 100
DIN 69895
DIN 69895 Coolant pipe with 2 sealing rings, Special O-ring up to 120 bar, angular movement from ±1°, polished Application:For the coolant supply through the centre of HSK toolholders.Note: - With filter for dirt particle-free cooling - 100µ stainless steel mesh filter- According to DIN 69895 for HSK-A and HSK-E hollow taper shanks- Axial sealed with two O-rings- Tightness of the screw connection tested up to 80 bar- After mounting, the coolant tube can be moved only to a minimum degree according to DIN (±1°)
Article number: A100.700.F.100
€54.00*
In stock (107 pcs.)
Coolant tube HSK 32
ISO 22402-1 (formerly DIN 69895)
ISO 22402-1 (formerly DIN 69895) Coolant pipe with 2 sealing rings, Special O-ring up to 120 bar, angular movement from ±1°, polished Application:For the coolant supply through the centre of HSK toolholders.Note:Axial sealed with two O-rings. After mounting, the coolant tube can be moved only to a minimum degree according to DIN (±1°).
Article number: A32.700
€12.00*
In stock (270 pcs.)
Coolant tube HSK 40
ISO 22402-1 (formerly DIN 69895)
ISO 22402-1 (formerly DIN 69895) Coolant pipe with 2 sealing rings, Special O-ring up to 120 bar, angular movement from ±1°, polished Application:For the coolant supply through the centre of HSK toolholders.Note:Axial sealed with two O-rings. After mounting, the coolant tube can be moved only to a minimum degree according to DIN (±1°).Delivery:
Article number: A40.700
€12.00*
In stock (226 pcs.)
Coolant tube HSK 50
ISO 22402-1 (formerly DIN 69895)
ISO 22402-1 (formerly DIN 69895) Coolant pipe with 2 sealing rings, Special O-ring up to 120 bar, angular movement from ±1°, polished Application:For the coolant supply through the centre of HSK toolholders.Note:Axial sealed with two O-rings. After mounting, the coolant tube can be moved only to a minimum degree according to DIN (±1°).Delivery:
Article number: A50.700
€14.00*
In stock (7379 pcs.)
Coolant tube HSK 63
ISO 22402-1 (formerly DIN 69895)
ISO 22402-1 (formerly DIN 69895) Coolant pipe with 2 sealing rings, Special O-ring up to 120 bar, angular movement from ±1°, polished Application:For the coolant supply through the centre of HSK toolholders.Note:Axial sealed with two O-rings. After mounting, the coolant tube can be moved only to a minimum degree according to DIN (±1°).All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: A63.700
€11.00*
In stock (98 pcs.)
Coolant tube HSK 80
ISO 22402-1 (formerly DIN 69895)
ISO 22402-1 (formerly DIN 69895) Coolant pipe with 2 sealing rings, Special O-ring up to 120 bar, angular movement from ±1°, polished Application:For the coolant supply through the centre of HSK toolholders.Note:Axial sealed with two O-rings. After mounting, the coolant tube can be moved only to a minimum degree according to DIN (±1°).Delivery:
Article number: A80.700
€15.00*
In stock (69 pcs.)
ER-Collet chuck HSK 40 - 1/10 - 65 | ER 16
DIN 69893-5 | HSK-E
DIN 69893-5 | HSK-E Application:For mounting straight-shank tools in collets.Delivery:With balanced clamping nutAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: E40.02.10
€119.00*
In stock (58 pcs.)
ER-Collet chuck HSK 40 - 2/13 - 60 | ER 20
DIN 69893-5 | HSK-E
DIN 69893-5 | HSK-E Application:For mounting straight-shank tools in collets.Delivery:With balanced clamping nutAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: E40.02.13
€119.00*
In stock (37 pcs.)
ER-Collet chuck HSK 40 - 2/16 - 75 | ER 25
DIN 69893-5 | HSK-E
DIN 69893-5 | HSK-E Application:For mounting straight-shank tools in collets.Delivery:With balanced clamping nutAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: E40.02.16
€120.00*
In stock (72 pcs.)
ER-Collet chuck HSK 40 - 2/20 - 100 | ER 32
DIN 69893-5 | HSK-E
DIN 69893-5 | HSK-E Application:For mounting straight-shank tools in collets.Delivery:With balanced clamping nutAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: E40.02.20
€123.00*
In stock (57 pcs.)
ER-Collet chuck HSK 63 - 2/20 - 90 | ER 32
DIN 69893-5 | HSK-E
DIN 69893-5 | HSK-E Application:For mounting straight-shank tools in collets.Delivery:With balanced clamping nutAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: E63.02.20
€120.00*
In stock (42 pcs.)
ER-Collet chuck HSK 63 - 3/26 - 120 | ER 40
DIN 69893-5 | HSK-E
DIN 69893-5 | HSK-E Application:For mounting straight-shank tools in collets.Delivery:With balanced clamping nutAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: E63.02.26
€130.00*
In stock (15 pcs.)
ER-Precision collet chuck HSK 40 - 2/20 - 70 | ER 32
DIN 69893-5 | HSK-E
DIN 69893-5 | HSK-E Application:For mounting straight-shank tools in 2 µm-collets.Advantage:Excellent concentricity in the system (chuck + collet + clamping nut)3 µm radial run-out with a 2 µm clamping nut, 6 µm radial run-out with a 5 µm clamping nutExtremely strong holding force (increases the holding power by at least 60% compared to standard ER chuck)Plain clamping nut without grooves for high speed machining
Article number: E40.P2.20.070
€125.00*
In stock (39 pcs.)
ER-Precision collet chuck HSK 50 - 2/20 - 70 | ER 32
DIN 69893-5 | HSK-E
DIN 69893-5 | HSK-E Application:For mounting straight-shank tools in 2 µm-collets.Advantage:Excellent concentricity in the system (chuck + collet + clamping nut)3 µm radial run-out with a 2 µm clamping nut, 6 µm radial run-out with a 5 µm clamping nutExtremely strong holding force (increases the holding power by at least 60% compared to standard ER chuck)Plain clamping nut without grooves for high speed machining
Article number: E50.P2.20.070
€130.00*
In stock (19 pcs.)
In stock (36 pcs.)
In stock (16 pcs.)
In stock (14 pcs.)
In stock (72 pcs.)
Key for coolant tube HSK 100
DIN 69895
DIN 69895 Application:For mounting the coolant tubes in HSK toolholders.All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: A100.701
€24.00*
In stock (50 pcs.)
Key for coolant tube HSK 32
DIN 69895
DIN 69895 Application:For mounting the coolant tubes in HSK toolholders.
Article number: A32.701
€25.00*
In stock (20 pcs.)
Key for coolant tube HSK 40
DIN 69895
DIN 69895 Application:For mounting the coolant tubes in HSK toolholders.
Article number: A40.701
€25.00*