DIN 69871 [ISO 7388-1]
In stock (36 pcs.)
Adapters SK to SK SK 40 - SK 30 - 50
ISO 7388-1 A [DIN 69871 A]
ISO 7388-1 A [DIN 69871 A] Application:For holding tapers according to DIN 69871, JIS B 6339 and DIN 2080.Delivery:Delivered with a built-in screw for shortened taper tools. Additional screw for DIN 2080 tools included.
Article number: 402.09.30
€114.00*
In stock (18 pcs.)
Adapters SK to SK SK 40 - SK 40 - 100
ISO 7388-1 A [DIN 69871 A]
ISO 7388-1 A [DIN 69871 A] Application:For holding tapers according to DIN 69871, JIS B 6339 and DIN 2080.Delivery:Delivered with a built-in screw for shortened taper tools. Additional screw for DIN 2080 tools included.All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: 402.09.40
€114.00*
In stock (205 pcs.)
Adapters SK to SK SK 50 - SK 40 - 70
ISO 7388-1 A [DIN 69871 A]
ISO 7388-1 A [DIN 69871 A] Application:For holding tapers according to DIN 69871, JIS B 6339 and DIN 2080.Delivery:Delivered with a built-in screw for shortened taper tools. Additional screw for DIN 2080 tools included.All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: 502.09.40
€152.00*
In stock (48 pcs.)
Adapters SK to SK SK 50 - SK 50 - 120
ISO 7388-1 A [DIN 69871 A]
ISO 7388-1 A [DIN 69871 A] Application:For holding tapers according to DIN 69871, JIS B 6339 and DIN 2080.Delivery:Delivered with a built-in screw for shortened taper tools. Additional screw for DIN 2080 tools included.All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: 502.09.50
€173.00*
In stock (39 pcs.)
Adaptor SK to ISO 26623 (PSK) SK 40 - PSK 32 - 30
ISO 7388-1 AD [DIN 69871 AD]
ISO 7388-1 AD [DIN 69871 AD] Application:For adaption from ISO40 to PSC (ISO 7388-1 to ISO 26623-1)Delivery:Clamping screwVersion:Adapters ISO / PSK with axial clamping. Ground internally and externally. The internal thread provided for the coolant tube in the PSC toolholder is plugged with the socket-head screw incorporated in the adapter. The clamping screw incorporates a through hole, so the system is suitable for through-coolant feed.Suitable for tool arbor with polygonal shank (PSC) - ISO 26623-1.
Article number: 402.09.C3
€315.00*
In stock (41 pcs.)
Adaptor SK to ISO 26623 (PSK) SK 40 - PSK 40 - 40
ISO 7388-1 AD [DIN 69871 AD]
ISO 7388-1 AD [DIN 69871 AD] Application:For adaption from SK/ISO to PSC (ISO 7388-1 to ISO 26623-1)Delivery:Clamping screwVersion:Adapters HSK / PSK with axial clamping. Ground internally and externally. The internal thread provided for the coolant tube in the PSC toolholder is plugged with the socket-head screw incorporated in the adapter. The clamping screw incorporates a through hole, so the system is suitable for through-coolant feed.Suitable for tool arbor with polygonal shank (PSC) - ISO 26623-1.
Article number: 402.09.C4
€318.00*
In stock (27 pcs.)
Adaptor SK to ISO 26623 (PSK) SK 40 - PSK 50 - 50
ISO 7388-1 AD [DIN 69871 AD]
ISO 7388-1 AD [DIN 69871 AD] Application:For adaption from HSK-A to PSC (ISO 7388-1 to ISO 26623-1)Delivery:Clamping screwVersion:Adapters HSK / PSK with axial clamping. Ground internally and externally. The internal thread provided for the coolant tube in the PSC toolholder is plugged with the socket-head screw incorporated in the adapter. The clamping screw incorporates a through hole, so the system is suitable for through-coolant feed.Suitable for tool arbor with polygonal shank (PSC) - ISO 26623-1.
Article number: 402.09.C5
€321.00*
In stock (24 pcs.)
Adaptor SK to ISO 26623 (PSK) SK 40 - PSK 63 - 90
ISO 7388-1 AD [DIN 69871 AD]
ISO 7388-1 AD [DIN 69871 AD] Application:For adaption from HSK-A to PSC (ISO 7388-1 to ISO 26623-1)Delivery:Clamping screwVersion:Adapters HSK / PSK with axial clamping. Ground internally and externally. The internal thread provided for the coolant tube in the PSC toolholder is plugged with the socket-head screw incorporated in the adapter. The clamping screw incorporates a through hole, so the system is suitable for through-coolant feed.Suitable for tool arbor with polygonal shank (PSC) - ISO 26623-1.
Article number: 402.09.C6
€324.00*
In stock (15 pcs.)
Adaptor SK to ISO 26623 (PSK) SK 50 - PSK 30 - 30
ISO 7388-1 AD [DIN 69871 AD]
Article number: 502.09.C3.030
€371.00*
In stock (3 pcs.)
Adaptor SK to ISO 26623 (PSK) SK 50 - PSK 40 - 30
ISO 7388-1 AD [DIN 69871 AD]
Article number: 502.09.C4.030
€374.00*
In stock (2 pcs.)
Adaptor SK to ISO 26623 (PSK) SK 50 - PSK 50 - 30
ISO 7388-1 AD [DIN 69871 AD]
Article number: 502.09.C5.030
€377.00*
In stock (10 pcs.)
Adaptor SK to ISO 26623 (PSK) SK 50 - PSK 60 - 100
ISO 7388-1 AD [DIN 69871 AD]
Article number: 502.09.C6.100
€390.00*
In stock (6 pcs.)
Adaptor SK to ISO 26623 (PSK) SK 50 - PSK 60 - 30
ISO 7388-1 AD [DIN 69871 AD]
Article number: 502.09.C6.030
€380.00*
In stock (78 pcs.)
Boring bar blank SK 30 - 40,5 - 160
ISO 7388-1 A [DIN 69871 A]
ISO 7388-1 A [DIN 69871 A] Application:For the manufacturing of special tools.Note:Cone and flange hardened and grinded. Soft body for later processing.All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: 302.17.40
€131.00*
In stock (20 pcs.)
Boring bar blank SK 40 - 63 - 250
ISO 7388-1 A [DIN 69871 A]
ISO 7388-1 A [DIN 69871 A] Application:For the manufacturing of special tools.Note:Cone and flange hardened and grinded. Soft body for later processing.All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mmTaper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: 402.17.63
€139.00*
In stock (97 pcs.)
Boring bar blank SK 50 - 97 - 315
ISO 7388-1 A [DIN 69871 A]
ISO 7388-1 A [DIN 69871 A] Application:For the manufacturing of special tools.Note:Cone and flange hardened and grinded. Soft body for later processing.All holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: 502.17.97
€220.00*
In stock (50 pcs.)
Boring holder for drills with indexable inserts SK 40 - 40 - 115
ISO 7388-1 AD/AF [DIN 69871 AD/B]
ISO 7388-1 AD/AF [DIN 69871 AD/B] Application:For mounting solid drills with cylindrical shank according to DIN 6595.Note:Contact surface precision grindedDelivery:With clamping screws
Article number: 403.51.40
€170.00*
In stock (63 pcs.)
Boring holder for drills with indexable inserts | SK 40 - 20 - 65
ISO 7388-1 AD/AF [DIN 69871 AD/B]
ISO 7388-1 AD/AF [DIN 69871 AD/B] Application:For mounting solid drills with cylindrical shank according to DIN 6595.Note:Contact surface precision grindedDelivery:With clamping screws
Article number: 403.51.20
€66.00*
In stock (95 pcs.)
Boring holder for drills with indexable inserts | SK 40 - 25 - 70
ISO 7388-1 AD/AF [DIN 69871 AD/B]
ISO 7388-1 AD/AF [DIN 69871 AD/B] Application:For mounting solid drills with cylindrical shank according to DIN 6595.Note:Contact surface precision grindedDelivery:With clamping screwsAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: 403.51.25
€66.00*
In stock (90 pcs.)
Boring holder for drills with indexable inserts | SK 40 - 32 - 75
ISO 7388-1 AD/AF [DIN 69871 AD/B]
ISO 7388-1 AD/AF [DIN 69871 AD/B] Application:For mounting solid drills with cylindrical shank according to DIN 6595.Note:Contact surface precision grindedDelivery:With clamping screws
Article number: 403.51.32
€66.00*
In stock (30 pcs.)
Boring holder for drills with indexable inserts | SK 50 - 20 - 70
ISO 7388-1 AD/AF [DIN 69871 AD/B]
ISO 7388-1 AD/AF [DIN 69871 AD/B] Application:For mounting solid drills with cylindrical shank according to DIN 6595.Note:Contact surface precision grindedDelivery:With clamping screwsAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: 503.51.20
€107.00*
In stock (60 pcs.)
Boring holder for drills with indexable inserts | SK 50 - 25 - 70
ISO 7388-1 AD/AF [DIN 69871 AD/B]
ISO 7388-1 AD/AF [DIN 69871 AD/B] Application:For mounting solid drills with cylindrical shank according to DIN 6595.Note:Contact surface precision grindedDelivery:With clamping screwsAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: 503.51.25
€107.00*
In stock (34 pcs.)
Boring holder for drills with indexable inserts | SK 50 - 32 - 70
ISO 7388-1 AD/AF [DIN 69871 AD/B]
ISO 7388-1 AD/AF [DIN 69871 AD/B] Application:For mounting solid drills with cylindrical shank according to DIN 6595.Note:Contact surface precision grindedDelivery:With clamping screwsAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: 503.51.32
€107.00*
In stock (53 pcs.)
Boring holder for drills with indexable inserts | SK 50 - 40 - 80
ISO 7388-1 AD/AF [DIN 69871 AD/B]
ISO 7388-1 AD/AF [DIN 69871 AD/B] Application:For mounting solid drills with cylindrical shank according to DIN 6595.Note:Contact surface precision grindedDelivery:With clamping screwsAll holders are made of forged steelSpecific, low warpage hardenedSurface hardened HRC 58~60Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080Surface roughness Ra < 0,4 µmTensile strength in the core of min. 800 N/mm² after DINAll functional surfaces fine machined
Article number: 503.51.40
€107.00*